13 best greenhouses made of polycarbonate
- Reviews: 0
- Views: 1805
What kind of greenhouse best buy
Greenhouse – the acquisition is not cheap, so such a structure should serve a long time. The main components of the greenhouse frame and cover made of polycarbonate.
The frame should be durable, able to withstand hurricane-force winds, substantial snow loads.
And it all depends on the material of its manufacture:
- Plastic pipe is cheap, easily assembled to the frame, not subject to corrosion. But the first snow of the winter will bring all these advantages to nothing: the greenhouse just collapse under the weight of snow, will not help and backup. In addition, the rigidity of the polycarbonate sheets is higher than among the plastic arches, so low strength is incorporated in the design.
- The aluminum profile is covered with rust, besides the lightweight products are easy to transport. Alas, the necessary rigidity they do not possess under the weight of snow bent and require thorough strengthening in the Foundation.
- Galvanized steel has sufficient strength and durability. If the section element of the frame a rectangle or square with a thickness of metal not less than 1.2 mm, then this option will be optimal. Works perfectly and a frame of galvanized pipes (preferably with no welded elements).
Two types of polycarbonate – solid and cell-to greenhouse you should choose the latter: it is lighter and holds heat better.
Also important is the thickness – it should be at least 4 mm and not more than 10, otherwise the coating will not transmit light. On the other hand, it is directly connected with heat conduction – the thicker the sheet, the warmer will be the plants.
Without an additional layer that protects the polycarbonate from UV radiation, even the highest quality material is quickly destroyed.
A special film is pasted only on the outside, although many manufacturers are limited to using a special spray.
What else you need to pay attention to when choosing greenhouse:
- Step bars – the closer they are to each other, the more reliable the structure;
- The presence in the set of seals;
- Additional options – doors and Windows for ventilation;
Greenhouses can be industrial – heating for year-round use and seasonal. The shape of the roof depends on needs, but on a steep, pointed roof, the snow stays for less.
Best arch greenhouses
Traditional arch shape greenhouse gardener familiar and easier to manufacture. There is enough space for growing crops of different heights.
Poligal Hummingbird "hero" Zinc 4x2,5 – the strongest greenhouse
Greenhouse hero from "New forms" is so called not in vain. It is able to withstand snow loads in 334 kg per 1 sq. m. This was possible due to the reinforced frame made of double galvanized steel pipe with cross-section 20x20 mm.
The spacing between arches is only 65 cm Structure can withstand hurricane wind speeds of 40 m/s. polycarbonate Russian or foreign reliable suppliers the buyer chooses their own.
Advantages:
- easy repair polycarbonate is just attached with screws;
- easy to transport;
- lightweight frame along with a polycarbonate and weighs 115 kg.
- a wide range of sizes.
Disadvantages:
- the weld arc.
With the ability to choose its width and length, this greenhouse is perfect for any area. It is especially good for use in regions with strong winds.
Bastion "Tulip" Premium with an opening roof
This greenhouse from the Moscow plant of Bastion – just a focus of innovation. With the system guides Antistorm frame is not afraid of any natural disasters. A pledge of this – a ten-year warranty from the manufacturer.
At the request of the owner can open the roof and side walls. Moreover, the special effort to do not need to make – will cope with the task and child.
Rubber seals sliding in the ground securely insulate the greenhouse. At a height of 2.1 m and width 3 m length can be from 4 to 10 m, depending on desires of buyer.
Advantages:
Disadvantages:
- a thin layer of galvanizing – will need a touch up;
- Assembly and shipping only in the Moscow region.
This greenhouse is ideal for those who do not want to spend a lot of effort to produce a crop.
Will Jot 220х200см – with a frame of galvanized pipe
The product is well-known Russian company "Will" fully meets all the requirements for a quality greenhouse.
Sturdy frame of galvanized pipe with cross-section 20x20 mm increments arcs 102 cm will last a long time – the producers give him a guarantee of 8 years.
And no wonder – this little girl is able to withstand heavy snow loads up to 560 kg/sq m. If winters are not extremely snow to disassemble in the fall it does not need.
Advantages:
- coverage of cellular polycarbonate 4 mm thick;
- two doors and two vents;
- the opportunity to increase the area due to the additional arcs;
- low price.
Disadvantages:
- width allows only two beds.
Will Jot is designed for small part, but she will be able to overwinter in most regions of Russia.
Billion April – greenhouse with reinforced frame
This greenhouse is produced by the company from Tyumen. APR frame made of profiled galvanized steel pipe section of 20x20 mm with gain the top.
Rigidity is provided by the welded elements – they do not need assembling and is ready to install.
To cover use polycarbonate foreign production thickness of 4 mm. Length of the greenhouse can be any multiple of 1 m. the Width and the height of 2.5 and 2.1 m, respectively.
Advantages:
- the ability to install without the base – metal pins;
- side window in addition to the doors and end vents;
- reinforced frame;
- low price.
Disadvantages:
- collect and have on their own.
Greenhouse April is ideal for regions with harsh climate.
The best gable of the greenhouse with straight walls
Straight walls of such structures allow to plant around them even taller culture, and snow on steep slopes in the winter is not delayed.
Very Hard to "advanced methods" – superkrepkoe with the perfect greenhouse microclimate
The name of the manufacturer in this case was very symbolic – frame greenhouse from one-piece dual-arc cross section 20x20 mm and 40х20 really very strong. It is able to withstand a record snow load in 778 kg per 1 sq. m.
All arcs are made of galvanized inside and outside steel thickness is 1.2 mm. the Company when you purchase issues on the product warranty card for 10 years. Will last a long time and polycarbonate thickness 4 or 6 mm protection from UV rays.
Advantages:
- perfect ventilation thanks to the special design;
- the mounting using the patented crab-system;
- wide size range;
- UV protection on the polycarbonate.
Disadvantages:
- high price.
This greenhouse will be used on any site. It is a capricious vegetable crops in need of an ideal microclimate.
AGS Service "Botanik Standard" is a beautiful greenhouse with aluminum frame
This elegant building from the Belarusian company will decorate any area. Despite the apparent fragility, manufacturers claim a service life of aluminum frame up to 30 years.
Roof with a properly chosen angle of the slope does not retain the snow, so its strength is sufficient for long term operation.
Coating of high-quality polycarbonate with a thickness of 4 or 6 mm – your choice, provide a comfortable existence to plants. For ventilation provided by mechanical compartment door and two vents in the roof.
Advantages:
- great design;
- long service life;
- rubber gasket for sealing;
- extra doors and vents.
Disadvantages:
- questionable reliability aluminum profile;
- high price.
Greenhouse Botanik Standard suitable for installation in regions with a temperate climate and not too snowy winters.
Bastion "Novator ' 5" – with removable roof
Such construction of the frame of the greenhouse has several advantages: you can use natural rainfall for watering, and the plants are better ventilated.
In winter the roof is removed, so that the snow load it is experiencing. Therefore, the step between arcs is made large enough – 2 m. But it is enough to provide the required frame strength.
Lintels made of steel pipe cross-section 30x30 cm in an arc section smaller 30x20 cm and 20x20 ties.
For ventilation do not have to remove the roof completely, can only slightly move it and lock in this position. Manufacturers give a guarantee for a greenhouse up to 5 years.
Advantages:
- high altitude – 2,33 m;
- 4 variants of length, multiples of 2 m;
- width 2.5 m is enough to make three beds;
- high quality polycarbonate;
- the planned annual maintenance of the greenhouse;
- low price.
Disadvantages:
- the frame is covered with anticorrosive paint and galvanized.
This greenhouse is ideal for regions with snow in the winter (if you have a place to store the removable roof).
Glass House "Arctic" – with additional segments
The original design of the frame of the native greenhouse allows you to adjust its height. Even though in the base case "growth" of the construction of large – 2.4 m. But with additional segments of the greenhouse can be increased to 3 m (a record for non-professional models).
Sturdy frame of galvanized steel profile thickness 1,5 mm helps the structure to withstand considerable snow loads. Depending on the desires of the buyer, it is possible to complete a cellular polycarbonate with a thickness of 4 and 6 mm.
Advantages:
- the polycarbonate fastening bolts;
- patented production technology with seven levels of control;
- comfortable deck lid compartments;
- two vents in the roof.
Disadvantages:
- only one door.
This beautiful house for plants particularly suited for growing indeterminate tomatoes and the cucumbers. High greenhouse owners will like it too – don't have to bend in three deaths.
The best greenhouse with a pointed roof
This form of roof in the greenhouse are suitable for regions where winters are very snowy. She had the lowest risk of damage, because the snow is simply nowhere to accumulate.
Greenhouse choice "Fazenda-4" Standard (dome) – a spacious greenhouse
The manufacturer of this greenhouse is a company from Saint-Petersburg. The frame is made of galvanized pipe cross-section 25x25 mm, metal thickness of not less than 1.2 mm.
Reduced step edges (65 cm) makes the construction solid and durable. Polycarbonate 4 mm thick are offered a choice of regular or nano.
Three-meter width of the greenhouse is sufficient for the device 3 beds and two aisles between them. Height 2.3 m allows to put on the Central bed of tall culture, and on the side – medium.
Advantages:
- ease of Assembly;
- welded arc;
- good ratio quality-price;
- the greenhouse is quite spacious and high.
Disadvantages:
- it is impossible to place culture high on the walls.
Greenhouse "Fazenda-4" is intended for regions with strong winds and frequent snowfalls.
Volga Greenhouse "Dome" – a building with an original Gothic roof
Plant "Volga greenhouses" has production capacities in the Moscow region, Kazan and other cities of Russia.
"The dome" – new with reinforced frame of tandem arcs cross section 20x20 mm. They have protective anticorrosion zinc coating both outside and inside. The base is further reinforced.
Step arcs may be different – 65 cm, 1 m or any other at the buyer's choice. May differ and the size of the greenhouse: with a height of 2.3 m and width 2.5 m, length ranges from 4 to 10 m.
The coating is made of cellular polycarbonate from verified manufacturers. Arc and the longitudinal ties are in the same plane, which eliminates the deformation of the sheets.
Advantages:
- the original roof structure;
- high-quality polycarbonate with UV protection;
- the best combination of price and quality;
- the crab system.
Disadvantages:
- no side vents.
The model of the "Dome" is suitable for almost any site, as it allows the customer to choose the size of the greenhouse and the density of the supports of the frame.
Atlas "Assol" – greenhouse with galvanized Foundation
New from the factory "Atlant" from St. Petersburg can withstand snow loads up to 180 kg on 1 sq. m. But the special Gothic roof just does not accumulate snow in such quantities.
Galvanized the most powerful of omega-shaped profile with a zinc content of 275 g/sq m and a cross section 110х50 mm makes the construction durable and long-lasting.
Manufacturer's warranty – 10 years. Each greenhouse is equipped with the base of the U-shaped galvanized steel profile, which is included in the cost. The size structure: 2,15х3,1x6. 25 m.
Advantages:
- the absence of welded structures;
- corrosion-resistant fasteners;
- the ability to move the greenhouse to a new location without dismantling;
- the Foundation in the kit.
Disadvantages:
- non-standard size.
Greenhouse "Assol" is intended for regions with harsh and snowy winters.
Very Hard to "drop" – with two doors and vents
Solid arches of galvanized inside and outside arcs section 40х20 mm strengthened family ties. Polycarbonate 4 mm thick with protection from UV rays is not the standard two, but all four bolts.
The design of the greenhouse maximally protects it from destruction due to accumulated snow. The roof can withstand a pressure of 340 kg per 1 sq. m. the Model has a length of from 4 to 10 m, width of 2.7 to 3.5 m buyer chooses their own.
Advantages:
- double corrosion protection – inside and outside;
- reliable fastening of the polycarbonate;
- warranty for 10 years;
- good airing.
Disadvantages:
- no vents on the roof, although it is not difficult ventilation.
Model "droplet" approach for regions, where a large snow load.
PC polialt Sellex "droplet" – coated polycarbonate own production
The plant in the Moscow region produces not only brand polycarbonate Sellex, but also greenhouses out of him. The frame "Drops" is made of galvanized square steel profile section 25x25 mm.
Step between arcs is less than the standard and is 65 cm, the Coating of polycarbonate coated to protect from UV radiation with a thickness of 80 µm can last up to 15 years. At a height of 2.3 m width 3 m greenhouse
Advantages:
- high-quality polycarbonate from the manufacturer;
- doors and Windows for ventilation with fixing mechanism in the open position;
Disadvantages:
- there is no possibility to choose a different width.
"Droplet" approach for any site, but it is especially good where there is much snow.
Read more: https://vyboroved.ru/reyting/luchshie-teplitsy-iz-polikarbonata
PlaceNameFeature in the rankingBest inflatable pools1Intex PureSpa Bubble Therapy 28404Inflatable po..
Small-scale mechanization can significantly ease the heavy work on the ground. Cultivator is the mos..
The most common solution in case of emergency disconnection of the mains voltage is gasoline. It als..
