10 best boats for fishing

People are engaged in fishing from time immemorial. Today, the fishery for the common people turned from a means of obtaining food in an ordinary hobby. Residents of large and small towns, villages and hamlets tend to get to the pond, where the fish and sit on the shore with a fishing rod or spinning. More advanced fishermen prefer to fish from a boat, because it opens much more opportunities and significantly increase the chances of success.

In the tourist and fishing tackle shops today a wide selection of boats, and presents the variety of goods it's very easy to get confused. We decided to ease you the problem of choice, and tell about the most popular models that are only available on the market. However, before to proceed to the ranking of the best boats for fishing, we decided to give you some important tips as to what rules and parameters you choose these models.

How to choose a boat for fishing?

The first step is to decide which reservoirs will be fishing. For example, in small rivers with low flow, the surface waters of shallow lakes or ponds the most optimal double inflatable boat even without a motor, oars. For larger ponds swimming facility should be more serious with the engine, capacity of which will reach at least 700 kg.

Be sure to pay attention to what materials the boat is made. Today in fashion came fiberglass, which looks very nice and is quite cheap in contrast to aluminum. However, it has a serious drawback: this material is subject to wear in terms of abrasive action, and can also break down due to hydrolysis.

Inflatable boat, made of PVC or rubber, require certain storage conditions, but also require from the owner's careful treatment and care. In particular, the material can be easily cut or burn, for example, a cigarette. If the boat is made of quality materials, it throughout the period of operation will not rot or deteriorate.

Most fishermen prefer inflatable boats: they don't need the trailer during transport, they are easy to move and alone. These boats are quite stable on the surface of the water, also well stand the shock waves. When buying such designs should carefully inspect all the seams, so they did not have not bonded areas, bubbles or irregularities. The bottom perfectly flat, without folds and wrinkles.

When compiling our ranking, we took into account all these factors and considering the feedback of users, the ratio of price and quality. This review includes not too expensive designs that will be on the money even people with a modest income. So, it's time to move on to the review of the best boats for fishing.

The best rowing boats

5. Leader CD 265

Opens our review quite cheap products, which is characterized by excellent resistance to water, therefore the manufacturer recommends to use it not only for fishing but also for hunting, for example, for ducks. Model when folded, occupies a minimum of space, is placed in a special backpack that came with the boat, the sides of which have pockets for the storage and transportation of collapsible oars. If a person has no car, then the boat is able to carry.

This product has a main design feature – the mobile banks gaining a foothold on the sides of the boat with the latest system "Lectro-likes". Because of this, the seated person will be able to choose the most comfortable position for yourself. This quality will be noted anglers who prefer to spend in the boat for several hours. Design can be used as one or two people. The pressure in the cylinders is quite high at 0.25 bar, whereby the stern can accommodate a small engine with capacity of 3.5 horsepower. The bottom is rigid, false, collapsible, made from waterproof plywood coated with a special anti-slip structures. Cylinders divided into several compartments, even if one of them gets corrupted, the rest will allow construction to reach the shore and not go down.

Advantages:

Reasonable price;

Once assembled, takes up a minimum of space;

• A bit of weight, you can single-handedly carry long distances.

Disadvantages:

• The manufacturer recommends a chance to use it only in calm and shallow water.

4. Taimen N-270C

This model is made from flexible PVC, a fabric which is well glued to each other, thereby minimizing the likelihood that the joints may appear to flow. The bottom rigid, foldable, made of marine plywood. It is acceptable to use as a rowing craft, and together with a weak engine up to 2,5 HP, When the need for such a boat can safely stand up without fear that it would tip over. From a standing position is very convenient to throw this tackle, like spinning, so fans of similar gear will appreciate its true value.

The bow part has a so-called log lines that will greatly increase the rigidity of this part of the design and not allow it to outweigh the aft side. This solution can significantly increase the usable area and place in the bow all the necessary details. Included is a hand pump a decent volume, so the pump will fail within a few minutes. The whole Assembly cycle is not more than 8 minutes if you do it alone, and 5 minutes if the two of us.

Advantages:

• Made from reinforced PVC high strength;
• Folding hard bottom;
• Mobile banks for additional facilities;
• High sides do not allow water to fill the vessel;
• The ability to install a small motor.

Disadvantages:

• Decent weight, it is better to transport by car.

3. The Pilot Pro C-280-M

Is quite a heavy model, so take her Hiking fail – weight of the product is 15.5 kg. In length boat is 2.8 meters in width 1.4 meters, the greatest weight that it can lift 220 kg, in other words, it is designed for two people. Comes with bag for transport and storage. The model is made on the basis of the five-layer reinforced PVC for durability and density: 750 g/sqm the material is not destroyed under the influence of fuel and lubricants like diesel fuel, gasoline, oil and so on. In addition, it is resistant to direct UV rays and is not affected by the occurrence of mechanical damage. The diameter of the boat is divided into two independent cylinder each having a diameter of 38 cm.

The bottom stretch, soft, stand on it not too convenient as there is a risk of falling into the water. Seat fixed on fixed plots, along all sides of a rail cable, which allows to ensure the highest level of security for all passengers. Has a nose ring-ring, whereby the boat can be towed. The warranty on such products is quite long – 2 years.

Advantages:

• High sides and lifted the nose, which allows it to withstand waves up to half a meter;
• Quality materials used for the boat.

Disadvantages:

• Soft stretch bottom on which to stand while fishing almost impossible.

2. Inflatable boat HUNTERBOAT hunter 280

This model has perfect balance in terms of price and quality. The boat has an amazing stroke on the oars moves fast enough, no need to put extra effort. This is the case even if the structure is fully loaded. Another important quality of this model is the size of the working area, which is one of the biggest among all in this section of the report models. European build quality combined with low weight provide optimum maneuverability.

This boat is well behaved as in shallow water, at depths from 60 to 100 cm and in deeper water more than one meter. It will easily fit two people as long as their total weight does not exceed 200 kg. Cylinders are divided into two compartments, the diameter of each of them is 39 see Banks are fixed in stationary sockets, fail to move them on the sides. The boat can be used for fishing and hunting. Carrying on the arms heavy – weight is 18 kg. dimensions are not too large – in length and 2.8 meters in width 1.4 meters. Comes with pump for inflation and deflation, hard floors, folding.

• A good level of maneuverability and control;
• Easily on the oars, quickly develops a decent speed;
• Reliability and build quality ensure a long service life;
• Ease of Assembly;
• The presence of hard bottom.

Disadvantages:

• Pump is weak, she will have to spend a lot of time preparing for the fishing;
• Despite a large effective surface for two active fishermen, this boat is too small and cramped.

1. STREAM Dolphin-M

This model is made from high quality reinforced PVC increased density: if the other boats got in our review, the figure is 750 g/sq m, then it increased to 950 g/sq. m. average Length – 2.7 m, width slightly below average 1.3 m fully assembled easily fits in a bag with dimensions 30х43х59 cm, this design weighs almost 20 kg, so for her to carry alone will be hard. The capacity of the boat is 220 kg, it is designed for 2 people. The bottles are split into two separate airtight compartments with a diameter of 36 cm.

Seams reliable, they are as modern technology that involves double gluing, providing a reliable connection of the sheets to the molecular level. Design is available in several color options – light grey, green and dark grey. The color should be chosen according to the hue of water, as well as the time of day when you plan to go fishing. The bottom is made of PVC, additionally reinforced by folding sheet of plywood 6 mm thick plywood seat is also, light weight. Along both sides of the stretched layer, which increases the safety of use and ease of portability. Accessories – oars, oarlocks, and so on – are manufactured in South Korea, has excellent quality, all the time finding this model on the market, there was not a single reference about the release of their failure.

Advantages:

• The bottom of high hardness;
• Sides are made of compacted PVC;
• A good degree of security and reliability
• High side.

Disadvantages:

• With the exception of a considerable mass not detected.

The best motor-rowing boats

5. Apache 3300 SK

Among the entire range of boats produced by this manufacturer, this design is one of the most compact and affordable in terms of price. In the process of development was taken into account the wishes of experienced anglers who love to swim in pretty serious depth. Largely due to this, the boat was very comfortable, easy to use and very reliable. The size of the cylinders were deliberately increased, so that the stability of the boats on the water even better. Its depth is about 40 cm, it can withstand wave height up to 65 cm.

Inner space – in a boat, whose length is 330 cm, can easily accommodate three people. The bottom is made on the basis of marine plywood 12 mm thick, so the waves are barely felt. Along the sides of a loose guard rails, the keel design is additionally protected from damage reinforcing reinforced PVC.

Advantages:

• May be installed motor power up to 4 HP.;
• For such a spacious design, the mass of the minor;
• The seats are fixed on the sides of technology"Lectro-likes", so they can be installed where most convenient.

Disadvantages:

• The nose is not lifted up against the current is weak.

4. Kayman N-330

This is one of the most popular boats in its class – it's perfect for two fishermen. The contours of inflatable cylinders have a large enough diameter, the bottom of the mosaic, made of several bond to each other elements, the bottom is not flat, has a slight keel that makes it easier to move against the current and makes the boat more stable even when big waves and strong wind. In addition, this design feature increases the performance maneuverability. It perfectly holds the course. When folded easily fits in the trunk of a car.

The load capacity is significant, especially because the boat is designed for two people – 420 kg with overall dimensions of 330х153 cm, the diameter of the cylinders is 42 cm alone to carry out such a design will not work, because she weighs 52 kg. seams of the PVC panels are joined together by welding. Comes with storage bag product.

Advantages:

• Some of the best around review of the driving characteristics;
• Around the perimeter of the structure is the fender;
• The seats can be moved along the entire length;
• Allowed to use a motor up to 5 HP

Disadvantages:

• Serious weight;
• The density of PVC is slightly lower than the other motor-propeller structures – just 850 g/sqm.

3. HUNTERBOAT 335



This is one of the most budget motor and rowing boats, which fully meets all current safety requirements applicable to such vessels. The design is understated, so this design is perfect for catching even the most cautious fish. The bottom of the keel type, floor made from thick plywood, thickness 12 mm. Design weighs 52 kg, once assembled, takes up minimal space – 1,2x0,75х0,45 m, whereby it is convenient to store and carry to the fishing spot.

The stability of the boat and a slightly raised nose allows you to use a fairly powerful motor up to 15 HP In this design can easily accommodate four people, especially since its capacity is. The cylinders have a diameter of 46 cm, made of high quality PVC with a density of 950 g/sq. m.

Advantages:

• Reinforced floor;
• The bottom of the cylinders and the keel is also strengthened;
• High levels of payload;
• If necessary, move the seat;
• A long warranty period which is 5 years.

Disadvantages:

• Together to carry a boat very hard and uncomfortable, so it's best if fishing will travel at least three people.

2. Aqua 3200 SK



This design has rightfully been the second best boat for fishing motor-propeller type, it equipped with fixed transom and is designed on three people and all necessary equipment. There is a mounting for the motor, the maximum capacity of which is 15 HP Cylinders are made on the basis of the five-layer reinforced PVC, German production and not too high density – this figure is 850 g/sq m. However, this did not affect the level of strength. The material easily withstands oil, gasoline and other similar materials, good resistance to physical stress, is not destroyed by ultraviolet light.

The diameter of the cylinders is 40 cm, bottom hard, equipped with a keel. Included with this boat is also going seat of waterproof plywood. Mount them fixed, equipped with special linings that do not allow acceleration of deterioration. Floors are also made from water-resistant plywood, which is further processed by laminating compositions. The mass of the whole structure is not too large – less than other similar models included in our review of the best boats for fishing, 44 kg.

Advantages:

• Acceptable weight, can be carried out together;
• The inflatable keel, which is further enhanced by using PVC lumber;
• Cylinders made of reinforced fabric.

Disadvantages:

• The payload design is lower than declared by the manufacturer, by about 30-40 kg.

1. Pilot M-330



Best with this design will be managed by the fishermen, who have rich experience in dealing with propeller and motor models, but for beginners, the boat is perfect. A connector for the universal motor, so you can first buy a low power engine, then take more powerful, however, the power should be no more than 15 HP

The keel is protected from abrasion by using piece of PVC, the width of which is 60 mm. the Hull is flexible, during movement bends slightly, so it will be well to resist the waves, not rubbing under the friction of the water. This solution allows you to provide long and reliable operation. The lower part of the structure is further reinforced durable PVC tape that protects the boat from abrasion during use and protects from damage during otchalivai or docking to the shore or the pier.

Advantages:

• Extended warranty;
• Low mass for inflatable boats of this type;
• Safety hinge for motor mounting;
• Heavy-duty cylinders;
• The fabric is made of PVC with a density of 900 g/sqm.

Disadvantages:

• Not detected.

In conclusion, an interesting video

Our review is coming to its logical conclusion. Hope you thought he was informative and interesting. If you are unable to decide on any model or you have any questions, you are welcome in the comments to our article. Here you can talk about your experience with a particular boat to others.




Source